Shop
Giant Lifting Bag for Pallet EMG 4467
$1,750.00
Giant Lifting Bag for Pallet EMG 4467
Description
This model was designed and constructed with heavy involvement from the offshore wind industry. The main purpose of this giant bag is to fit an entire EU-pallet inside and hereby lowering the amount of lifts needed.
The bag is able to carry content weighing up to 1 ton.
Properties
Properties
- *NOTE: The bag is NOT sold with a pallet as shown in the picture above.
- It is possible to attach a pallet underneath the bag for easier movement on the ground. This is done by guiding polyamide ribbons underneath the bag and pallet and through stainless steel buckles.
- The bag is made from a heavy tarpaulin material making it strong and water repellent.
- 4467 uses 4 lifting straps which are made of high quality polyester webbing.
- Stainless steel buckles are used to tighten and strengthen the walls of the bag.
- The lid is closed by velcro and 50mm plastic buckles around the sides of the bag.
- The front of the bag can be opened, folded and used as a ”gate” making it easier to fill the bag and making it possible to place an entire pallet inside using a fork lift.
- A plastic tube is placed inside the top of the ”gate” for rolling the fabric.
- The front opens by zippers on each side.
- A removable velcro patch for easy logo printing is placed on the front of the bag.
- A transparent plastic pocket for A4-documentation or markings is placed in each end of the bag. The pockets are attached by velcro and can be easily removed.
- The bottom cover is made of PEHD plastic to prolong the life span of the bag and offer weight distribution.
- Hard plastic plates are placed inside the walls of the bag.
- A 20 mm PVC plate is placed inside the bag to offer protection and weight distribution.
- The walls can be taken out and placed in the bottom of the bag to lessen the space consumption of the bag when transporting or storing it.
- The bottom cover is detachable and can be replaced, if needed.
